A spiral sand washing machine is currently the most efficient equipment for cleaning sand and gravel. In terms of technology, the advantages are obvious, and the structure and process have been improved. A spiral sand washing machine is mainly composed of a washing tank, mortar pump, motor, cyclone, linear vibrating screen, return box, and other components.

Working principle of spiral sand washer

When the spiral sand washing machine is working, the motor drives the impeller to rotate slowly through the V-belt, the reducer, and the gear after deceleration, and the sand enters the cleaning tank from the feeding tank. Then, driven by the impeller, they roll and grind each other to remove the impurities covering the surface of the sand and gravel. At the same time, the water vapor layer covering the sand grains is destroyed to facilitate dehydration. At the same time, add water to form a strong water flow, take away impurities and foreign matter with a small specific gravity in time, and then discharge it from the overflow washing tank to complete the cleaning effect.

Technical advantages of spiral sand washing machine

1. The spiral sand washing machine not only occupies the market by its productivity and stability but also adopts the technology of environmental protection and energy-saving. During the production process of the spiral sand washing machine, the noise is greatly reduced, and it is also harmful to the surrounding environment. The pollution is also reduced to a low level. The structure of the spiral sand washing machine is unique, which has the characteristics of low consumption, high energy saving, and high sand production.

2. The technical level of the spiral sand washer far exceeds those produced by traditional technology in the market. The manufacturer of the spiral sand washer also has a technically experienced team to provide users with a full range of technologies.

Operation precautions of spiral sand washing machine

The operation level of the operator of the spiral sand washer will also affect the output of the spiral sand washer. Therefore, before using the spiral sand washer, it is necessary to do a good job in the training of the operators, so that the operators can understand the working principle, performance characteristics, and various precautions of the spiral sand washer. Secondly, when the spiral sand washer is working, the motor drives the impeller to rotate slowly through the V-belt, reducer, and gear. Therefore, let the spiral sand washer idle for one or two hours before use, and work after no objection is detected.

For the spiral sand washer operating in the open air, some details should be paid attention to, such as the installation location of the spiral sand washer, the terrain, and the surrounding environment, and try to avoid some unfavorable factors. Moreover, try not to expose the spiral sand washer to rain and sunlight. The protection of the spiral sand washer will greatly improve the working efficiency of the spiral sand washer.