When we use the sand washing machine, the sand washing equipment will inevitably fail, so how should we improve the production efficiency of the sand washing machine?

1. Pay attention to the inspection when installing the sand washing machine

When the sand washer is first installed, a full inspection is required and it is turned on for 8 hours with no load. When the sand washer is running with no load, the technician should continue to add lubricant to check whether the connection point of the sand washer is firm. After that, the load runs for about 8-24 hours.

2. Regular inspection and maintenance of sand washing machine

The sand washing equipment should be regularly maintained and inspected, and problems should be found and solved in time to ensure the normal operation of the sand washing equipment. If maintenance is not carried out in time, various failures of the sand washing machine may occur, thereby reducing the production efficiency of the sand washing machine.

3. Install the foundation firmly

It is the first point to ensure that the installation foundation of the sand washing machine is firm, and that enough space is reserved for the foundation of the sand washing machine installation site. The second is to have enough production space, which is also to ensure the stability of material transportation and production so that the cleaned materials have enough storage space to prevent secondary pollution to machine-made sand.

4. Clean the sand washing machine in time

After using the sand washing machine, it is necessary to develop a good habit of cleaning in time. With the passage of time, the dust in the sand washer will gradually accumulate, and the pipes of the sand washer will be blocked. Therefore, it should be cleaned in time, and all parts of the sand washing machine should be cleaned dried, and checked.

5. Regular lubrication work

Lubricate the sand washer regularly, use the specified specification and brand of lubricating oil, and don’t forget any lubrication points.

6. Do a good job of anti-rust and rust removal

The steel of the sand washing machine and the outdoor working environment require that the sand washing machine should do rust removal and rust prevention work in time, and the sand washing machine will be in contact with water for a long time. If it is not dealt with in time, it may cause the parts of the equipment to rust and become inoperable, and the operation of the sand washing equipment will be inflexible, which will affect the normal operation efficiency of the equipment.

7. Regularly observe the wear of the sand washing machine

The wear of the internal parts of the sand washing machine needs to be checked regularly. During our inspection, if any parts are found to be severely worn, which will affect the production operation of the sand washing machine, we need to repair and replace them in time. If it is a more important part that cannot be replaced by yourself, you need to contact the dealer for repair and replacement in time.

After a long period of operation, the sand washing machine will experience certain wear and tear. Our effective maintenance and maintenance can effectively reduce the failure rate of sand washing equipment, thereby reducing unnecessary maintenance costs.