The main function of the sand washing machine is to remove impurities in sand products. In the production process of machine-made sand, the sand washing machine has the advantages of large processing capacity and high cleaning degree. The efficiency of the sand washer may be reduced. The method to improve the working efficiency of the sand washing machine is introduced.

1. Pay attention to the installation of the sand washing machine

When installing a sand washer for the first time, a thorough inspection should be carried out. At the same time, the machine should be started with no load for 8 hours. When the sand washer is running with no load, the technician should continuously add lubricating oil to check whether the connection point of the sand washer is firm, and then run with load for about 8-24 hours.

2. Regular inspection and maintenance of sand washing machine

Regular maintenance and inspection of the sand washing machine equipment, and timely development and resolution of problems found to ensure the normal operation of the sand washing machine. If the maintenance is not timely, the sand washing machine may have various failures and reduce the production efficiency of the sand washing machine.

3. The foundation of the sand washing machine is firm

The sand washing machine should ensure that the production line has a solid foundation and sufficient production space to ensure the smooth transportation and production of materials. The cleaned machine-made sand should have enough storage space to avoid secondary pollution of the machine-made sand.

4. Clean the sand washing machine in time

The sand washing machine should develop a good habit of cleaning in time after use. After a long period of accumulation, the pipes of the sand washing machine are likely to be blocked. Therefore, the sand washing machine should be cleaned in time, and the various parts of the sand washing machine should be cleaned and dried.

5. Regular lubrication

Lubricate the sand washing machine regularly, use lubricating oil of specified specifications and grades when lubricating, and do not forget any lubrication points.

6. Anti-rust and rust removal

The steel of the sand washing machine and the open-air working environment require the sand washing machine to do a good job of rust removal and rust prevention in time. If the sand washing machine is in contact with water for a long time, if it is not handled in time, it may cause the parts of the equipment to rust, the operation is not flexible, and the normal operation efficiency of the equipment is affected.

7. Regularly observe the wear of the sand washing machine

Regularly observe the internal wear of the sand washer. If it is found that the parts of the sandblasting machine are worn and affect the production operation, it must be repaired or replaced in time. After the important wearing parts of the sand washing machine are worn out, contact the manufacturer to repair and replace them in time.

Seven methods to improve the working efficiency of the sand washing machines are introduced. In the long-term operation of sand washing machine equipment, various wear or failures will occur. Effective maintenance of sand washing machines can reduce equipment failure rates and unnecessary maintenance costs.