The most vulnerable part of the dewatering screen is the screen. The main reasons for the rapid damage of the screen are sticky materials, soil accumulation, two vibration motors installed reversely, wrong steering, the screen is not tensioned, and the screen quality is poor. So what measures should be taken to solve these problems?

1. The accumulation of clay and materials is because the amplitude of the dewatering screen is too small, which makes it difficult to screen the materials. Therefore, the amplitude of the dewatering screen should be increased, and the screen can also be washed with water to reduce the adhesion on the screen.

2. When the motor turns incorrectly, the stop button should be pressed when the screen box is moving. After the dewatering screen is stopped, whether the small dots on the side plate move in an elliptical manner, or check whether the eccentric block rotates to the outside.

3. For the problem that the screen is not tensioned, the tension of the screen should be adjusted so that the screen is in a tight state.

4. Given the poor quality of the screen, the screen should be replaced. The polyurethane screen used in the screen of the Longzhong dewatering screen is reliable in terms of strength and service life.

The dewatering screen produced by Luoyang Longzhong Heavy Industry is made of real materials, starting from the interests of customers, durable, practical and economical, high production efficiency, low noise pollution, customers in need are welcome to consult!